WOOD BASED PANELS PB/SPB OSB/LSB/FOSB MDF/HDF PLYWOOD
The SMC200 is able to handle the cutting and sanding of the samples autonomously, starting from the “laboratory cut” made by the continuous saw; this gives the operator time to concentrate on other tasks such as running the tests themselves.
To achieve a quality cut and sanding of the samples with repeatability, the SMC200 does not require operator intervention for the preparation of the samples hence ensuring a constant sample quality.
For an optimal distribution of the samples over the panel.
To manage the number and size of the samples which are to be cut.
To keep track of the samples that have been cut. The SMC200 cuts and sands the samples with 0.1 mm precision, thus ensuring that the samples are produced with straight edges and parallel surfaces.
To run an elevated number of tests daily with the assistance of just one operator.
To cut and sand the samples without putting operator safety at risk, the SMC200 does not require operator intervention hence minimizing exposure to unnecessary risks.